Limit Different Bandwidth Day and Night
Bukan krim muka cewek aja nih yang harus di bedain antara siang dan malam.. bandwitch internet juga terkadang ada yang bedain antara bandwidth siang...
Home » Semua posting
Misalnya kayak gini ya. ntar tinggal rubah aja yang perlu sesuai dengan kebutuhan ente semua
Network = 192.168.1.0/24
Bandwidth = 06:00am – 18:00pm – 1Mbps.
Bandwidth = 18:00pm – 06:00am – 2Mbps.
z 12:23 AM Admin Bandung Indonesia
udah akh... langsung aja yah..
Ini dia caranya berhentikan dan blokir website dari MikroTIK Router OS
Configuration Proxy :
/ip proxy
enabled: yes
src-address: 0.0.0.0
port: 8080
parent-proxy: 0.0.0.0:0
cache-drive: system
cache-administrator: "Prazt"
max-disk-cache-size: none
max-ram-cache-size: none
cache-only-on-disk: no
maximal-client-connections: 1000
maximal-server-connections: 1000
max-object-size: 512KiB
max-fresh-time: 3d
z 12:00 AM Admin Bandung Indonesia
Blocking website and making Transparent Proxy (Mikrotik Mode-on)
huft... sekian lama bertempur dengan segudang kesibukan yang super sangat sibuk... akhirnya baru sekarang ini bisa mengupdate blog kesayangan gue ini....
udah lama juga gak posting di blog ini karena bermacam kendala salah satunnya Sudah beberapa minggu ini Kartu Perdana Flash Unlimited punya ane sudah tidak bisa dipake gara2 selalu muncul “Error 619:A connection to the remote computer could not be established, so the port used for this connection was closed.”, padahal sebelumnya selama kurang-lebih 2 bulan dipake kaga ada masalah. Ane sudah coba googling di inet buat cari tau solusinya ternyata masi menemukan jalan buntu.
Ane dah coba ganti2 modem, trus ganti2 APN, tapi tetep hasilna nihil. Sempat terpikirkan mo tanya langsung ke CS Telkomsel dan ke Grapari untuk menanyakan kasus ini, tapi setelah baca beberapa postingan teman2 ane jadi ragu n males, karena ujung2nya mereka ga nemuin solusinya.
Akhirnya….ane pikir2 klo model FlexiNet itu kan butuh minimal 10rb untuk bisa koneksi internet, maka ane test aja isi pulsa, tapi hasilna jg masi nihil. Trus ane liat2 lagi ke inet cara untuk aktifkan internet, ternyata disana untuk Telkomsel ada 2 koneksi yang berbeda, klo untuk 3G dengan cara kirim sms dengan pesan 3G ke 3636 dan untuk yang GPRS dengan mengirim sms pesan GPRS ke 6616. Setelah diingat2 ternyata ane baru aktifkan yang 3Gnya saja, karena waktu awal sinyal yang kedetectnya 3G/UMTS/HSDPA. Nah baru2 ini ternyata sinyal yang sering muncul yg GPRS.
Maka akhirnya ane register dulu GPRSnya dengan cara mengririm sms ke 6616 dengan pesan GPRS. Setelah menunggu beberapa saat ada balasan dari Telkomsel yang isinya kira-kira disuruh menunggu max 48 jam. Wuih lama amir :D tapi ya sudah namanya juga coba2. Tapi ketika ane selese sholat ternyata ada sms masuk lagi yang memberitahu klo sdh berhasil registrasinya. setelah itu ane coba lagi deh koneksi pake APN internet, dah alhamdulillah ternyata berhasil :D
akhirnya hilang sudah Error 619 yang selama ini selalu menemani koneksi pake perdana flash unlimited :D z 3:11 AM Admin Bandung Indonesia
Solusi ERROR 619
udah lama juga gak posting di blog ini karena bermacam kendala salah satunnya Sudah beberapa minggu ini Kartu Perdana Flash Unlimited punya ane sudah...
Rangkaian Kabel RJ-45
Mungkin sebagian udah pada tau ya tentang urutan - urutan kabel jaringan di connector RJ-45, tapi gak ada salahnya kan kalau saya memberikan contoh...
IBM BIOS:
| Indicator | System status |
| No Beeps – No Power | Loose Cord, or Short. |
| 1 Short Beep – Normal POST | Computer is ok. |
| 2 Short Beep – POST error | review screen for error code. |
| Continuous Beep – No Power | Loose Cord, or Short. |
| Repeating Short Beep – No Power | Loose Card, or Short. |
| One Long and one Short Beep | Motherboard issue. |
| One Long and Two short Beeps | Video (Mono/CGA Display Circuitry) issue. |
| One Long and Three Short Beeps | Video (EGA) Display Circuitry. |
| Three Long Beep | Keyboard / Keyboard card error. |
| One Beep | Blank or Incorrect Display Video Display Circuitry. |
Award and Phoenix BIOS:
| Indicator | System Status |
| 1 short beep: | Normal |
| 2 short beeps | CMOS error |
| 1 long and 1 short beep | RAM error |
| 1 long and 2 short beeps | Video card error |
| 1 long and 3 short beeps | Keyboard error |
| 1 long and 9 short beeps | ROM error |
| Long continuous beeps | RAM not installed correctly |
| Short continuous beeps | Bad power supply or over heating |
Problem with power supply or CPU chips:
Make sure the power connector is connected correctly and fitted firmly in the motherboard socket, some mother boards require two connectors from the power supply, refer to mother board manual. If the problem persists try using a different power supply. Check CPU fan,remove chip and clear dust, make sure it is mounted properly.
Video card problem:
Remove video card and inspect for cracks or bad connectors. Make sure the video card mounted correctly in the slot, try using a different video card.
Keyboard error:
Either the key board is not functioning or is not attached correctly, try a different key board, if its has a PS/2 connector then make sure its not plugged into the mouse connector.
RAM error:
Remove ram inspect for cracks, bad connectors or dust. Insert the chip back into the slot and make sure its firmly seated properly in the slot, if the mother board has more then one slot then make sure the chip is in the first slot (i.e. closest to the CPU). If the problem persists change ram.Download MS memory diagnostic.
No beeps and no POST
Pull everything out of the machine except for the CPU and power the PC up. The PC should now only consist of a power supply, a motherboard and a CPU/HSF. This means your PC should have no video card, RAM or IDE cables. You should have no PCI cards and that includes modems and sound cards. Have a power button and speaker hooked up to the board so you can turn it on and listen for beep codes.
If you have the PC stripped down this much and you still do not get any beep codes, then you may have an issue with either the CPU, motherboard or power supply.
Problems after booting:
Pc Freezes:
Check CPU fan, case fan and power box fan, make sure all are working and clean off dust. Check hard drive, CPU, power supply for over heating. Some video cards may also heat up and create excessive heat inside the case. Make sure that the case is kept cool, by maintaining good air flow.
- Scan hard drive for bad sectors.
- Make sure all devices are functioning properly are plugged in. Unplug any faulty device.
- Unplug any new devices or software installed.
Pc Restarts while in use:
One problem could be bad RAM, replace RAM and restart machine. Open up resource hungry applications like Office, Photoshop, many instances of internet explorer until all the ram is used up. If system doesn’t freeze or restart then return old chip to manufacturer.
Check capacitors on motherboard make sure that they aren’t bulging, leaking, or burned. If they are – that’s the problem.
Voltage problem or overheated components:
If the computer is actually functioning and the computer beeps continuously, then there is a problem with a voltage on the power supply being incorrect or the CPU overheating. Go into the BIOS and check CPU temperature, fan speed and voltages
z
7:12 PM
Admin
Bandung IndonesiaBEEP ERROR CODES
IBM BIOS:
IndicatorSystem status
No Beeps – No PowerLoose Cord, or Short.
1 Short Beep – Normal POSTComputer is ok.
2 Short Beep – POST errorreview...
